3.5 × 1.35 mm DC Female Pigtail Manufacturer

Define the cable item within your equipment kit

If you are preparing a cable item for an equipment kit, begin by describing what belongs in that item. Identify the DC3.5 × 1.35 mm female pigtail, give it a purchasing reference and show the mating component in your assembly documentation. Mark whether the mating component is supplied separately or is another item you want discussed in the inquiry. Keep the scope of each line item clear.

For a kit assembled by more than one team, include the intended connection in a simple component list. State who controls the mating-part drawing and who approves the wire-end requirements. Your inquiry can then refer to those documents without combining their different responsibilities into an unclear request for a complete set. Ask for the proposed cable description to use the same item reference as your purchasing list.

Consider the information needed by the person receiving the cable as well as the person selecting it. Which drawing revision should be used? Which configuration belongs to this kit? Is an appearance preference still under review? Include those details in the request and identify any unresolved requirement before you compare quotations or approve a sample.

The DC35135 female configuration and listed options

The product specification identifies a DC3.5 × 1.35 mm female connector. The DC single-ended series includes the DC35135 female identity and lists lengths of 20, 50, 100, 150, 200, 300 and 500 cm, plus customized lengths. Choose the length required by your layout and include its measurement convention in the proposed item specification.

For appearance and construction choices, the series lists black or customized color and PVC or rubber outer sheath options. Its customization scope includes length, connector type, sheath color or material, and packaging method. Select the combination you want quoted and discuss any project-specific requirements alongside those choices.

If you have several kit versions, distinguish a common requirement from a version-specific one. For example, you can request that the connector identity remain the same while each version has its own length requirement. Identify the alternatives in your brief and ask for them to be itemized. The final selection should be explicit for each item rather than left as a general series option.

Describe the mating connection with a shared reference

Start the interface review with the actual mating-part drawing your project intends to use. Include its identifier and current revision. Ask for the proposed female connector dimensions needed to compare the two parts. Keep any dimensions that your team has not established on an open-questions list, rather than guessing them from a photograph or the product designation.

Show the intended connector location on the equipment or kit layout. Ask your assembly team which nearby features it needs included in the review and how the connection will be reached during assembly. Where the cable is intended to remain accessible, describe the position that should be considered. Where the layout is unfinished, mark the proposed location as provisional.

A useful buyer instruction could read, 'Quote the female pigtail under our cable item reference; use the linked mating-part drawing for the interface review, and treat the layout sketch as provisional.' Replace that example with your own project references. Its purpose is to make the requested relationship clear, while keeping the configuration subject to your drawing review.

Decide what happens at the wire end

Specify the intended connection method at the opposite end of the cable. Ask which preparation can be supplied for the proposed construction and provide the dimensions your assembly process needs. If your kit includes another component that will receive the wire end, identify that component as a reference and show the intended connection in the same drawing set.

Your wiring schedule should identify the intended contact assignment and polarity with an unambiguous viewing direction. Include any wire identification that the assembly team requires. Ask for the proposal to be checked against that schedule. Keep those instructions separate from the outer sheath color choice, so a request for black or a custom appearance does not stand in for a connection definition.

List the electrical requirements that your engineering team has established for the complete item. Include any required documents in the inquiry and ask how the proposed configuration will be described against those inputs. Review the finished cable requirement as a whole, with connector identity, connection map and wire-end preparation recorded together.

Make length a defined part of the kit specification

Locate both ends on your assembly sketch, then draw the intended cable path. Include any position used during assembly if it differs from the final arrangement. Ask the team responsible for the kit to establish the required length from that route. If more than one route is being considered, identify each alternative and keep the decision visible in the inquiry.

Give the length explicit reference points. Show where the measurement starts and ends, and state the tolerance your project needs. If you are comparing this cable with an existing component, note whether both lengths use the same convention. A purchasing description should let the drawing reviewer understand the requested dimension without interpreting the word length differently from the buyer.

Custom lengths are listed for the DC single-ended series. Submit the dimension required by your kit rather than limiting the brief to the published length choices. For multiple kit versions, use a separate line item for each selected length and ask for consistent item identification in the quotation. Keep alternatives clearly separate from the configuration you ultimately approve.

Choose packaging around your receiving and kitting plan

Packaging method is part of the listed customization scope. Describe how your team wants to receive, identify and group the cables, and ask which arrangement can be quoted. If the cable will be included in a larger kit after receipt, explain the reference information you need maintained through that step. Keep the request focused on the packaging you want considered.

Provide an example of your desired item identification if that will help the discussion. Use your actual item name, drawing revision and requested grouping. Ask for any proposed alternative to be stated in the quotation. Essential receiving requirements should be distinguished from appearance preferences that your team could evaluate during the review.

For related cable items, consider preparing a small receiving checklist that refers to the approved description for each item. Ask your team to compare the identification, selected configuration and quantity with the purchasing documents. Record discrepancies against the item concerned instead of treating the entire kit as one undifferentiated cable purchase.

Keep the kit description consistent across documents

Before sending the inquiry, compare the cable name in the component list with the name used on the drawing and packaging request. Use one item reference across those documents. If an earlier kit revision used another cable, mark the previous reference as superseded and explain the requested change. Give the person receiving the quotation access to the same current documents as the engineer reviewing the interface. This makes the purchasing decision specific to the kit version you intend to build.

Approve a configuration that the next team can recognize

If a sample is requested, tell us what your team intends to review and which documents will govern that review. Include the female interface, the cable route and the wire-end connection in your approval questions. Define any required checks or documentation before deciding that the sample represents the item you want to order.

Record the selected length, sheath material and color alongside the connection requirements. If another person will place the order, provide that person with the agreed description and current drawing link. Note unresolved points separately. A review that accepts appearance while leaving another requirement open should retain that distinction until the final purchasing decision.

Use the DC product catalog to revisit the connection identity if needed, and the customization page to organize the options you want discussed. When the brief is ready, contact Huajunxin with your drawing link, requested quantity and packaging requirements. Ask for the configuration and commercial terms to be confirmed together, with the cable clearly identified as its own item in your kit.

Frequently asked questions

What is the connector identity on this page?

This page covers the DC3.5 × 1.35 mm female pigtail. Provide your mating-part reference and ask for the full connector drawing needed by your project before approving the proposed configuration.

Can I request separate lengths for different equipment kits?

The series lists several lengths and custom length options. Identify each kit version and required dimension as a separate requested item, with measurement endpoints and the connector identity stated for each one.

Can packaging be part of the quotation?

Yes. Packaging method is listed in the series customization scope. Describe your receiving and identification requirements, including any grouping you want considered, and ask for the proposed arrangement to be included in the quotation.

What should the wire-end brief contain?

Describe the intended connection method, required preparation and relevant dimensions. Include the contact assignment and any identification instructions your team uses. Ask for those requirements to be reviewed for the proposed cable construction.